Modern Cremators
Modern Cremators has been manufactured Pollution Engineerings (M) Sdn Bhd locally for the authorities, associations and private companies for the sole purpose of providing cremation services to the bereaved family.
Cremator is a mechanical device that adopts thermal process to burn the body into ashes in a fully controlled environment to ensure minimal pollution to the environment.
Customized Design
Modern cremators are specially designed with two combustion chambers where the first chamber must be large enough to fit in any size of coffin while the second chamber is meant for burning any incomplete combustion gases generated from the first chamber.
This will ensure the emission will have no visible smoke when it is released to the atmosphere. Due to the high operating temperature which ranges from 600 – 1100°C, cremators must be constructed using special materials that have heat resistance such as refractory or fire bricks.
There is a wide range of qualities for such heat resistance material. It is important to select the right type of material that suits the operating condition for safety reasons.
Cremators Heat Source
The source of the high operating temperature comes from the burners where it will be installed on certain locations of the both chambers to ensure the fire has a direct and better coverage while cremating.
These burners can be either fuelled by diesel or gas depending on client’s preference. The modern burners today are savvier in terms of fuel saving by having different functions such as “On-Off” or “Hi-Lo” modes.
Burners are linked to temperature controllers which can pre-set the preferred operating temperatures and also temperature sensors which are used to measure the temperature in the cremators.
Cremators Multi Components
By having all these three equipment working together, the cremator not only can ensure the operating temperature is always at its optimum level, reduce fuel consumption but also protects the condition of the cremator for a longer lifespan.
All burning requires air. It is important to supply the right amount of air because with insufficient air, the burning will be incomplete and resulting undesired results. Therefore it is necessary to have air blowers to supply sufficient air into the chambers during cremation.
Summary for Cremators
Although the cremation process might sound technical but however, it is all fully programmed and automated using control panel.
Operators can use the cremator with just a push of a button or operators can choose to operate the cremator manually.
Apart from fuel saving, it is also energy saving as the cremator only requires minimal energy for start-up.
For more information do visit our Incinerator & Dryer System.
Powered by : MyUnit

