| |
HiWave TM Dryer |
| |
Printable View |
| |
 |
| |
Features |
| |
- Easy Operation
- 0 % Moisture Content
- Quick Drying
|
 |
| |
Advantages |
| |
- Economical
Less Labour cost - Requires only one man to operate
Lower Capital Investment
Less Power Consumption - Efficient Drying
- Instantaneous Response
The HiWave TM Dryer can be instantly turned
on and off without warm-up and cool-down time required.
-
Easy Operation
and Maintenance
The HiWave TM Dryer operation is automatic except for
the feeding and discharging. The only maintenance required is the
magnetron tube. Typical operating life of these tubes is above 6,000
hours.
- Capable to Treat Wide Range of
Materials
Microwave exposure time of the products can be
adjusted to suit various moisture contents and waste characteristics to
minimize energy wastage.
-
International
Safety Standards Compliances
Uniquely designed to reduce microwave leakage to no
more than 10 mW/cm2 measuring at 5 cm from accessible surfaces of the
system under operation conditions. All control systems are equipped with
safety interlocks that shuts off the microwave power instantaneously in
the event of improper operation.
-
Precision
Controls
Microwave exposure time of the products can be
adjusted to suit various moisture contents and waste characteristics to
minimize energy wastage.
|
| |
|
| |
Many sludge dryers in the market uses traditional heating methods such as
steam, electrical coils or even diesel and LPG burners. These methods are
usually poor in efficiency. More than 60% of energy is lost into the
atmosphere and they can only dry sludge up to 90% solid content maximum. |
| |
|
| |
Microwave Technology For Efficient Performance |
| |
The HiWave TM Dryer was specially developed by Pollution Engineering Sdn. Bhd.
using microwave technology. While typical sludge dryers are relatively
inefficient and large size, the smaller sized HiWave TM Dryer can dry all
types of sludge more than 100% moisture removal in a shorter time. High
efficiency performance and reducing sludge volume up to 80 times saves much
more on your sludge disposal cost! |
| |
Mechanical agitator to enchance
evaporation |
Loading from top, Extract from bottom |
| |
|
| |
Microwave technology features selective type of heating targetting
only the water and solvents in the sludge and cause it to be heated and
evapo-rated volumertically at a consistent rate. The solid content is inert
or transparent to the microwave. After removing all the moisture and
solvents in the sludge, excesive energy will act on the solid and activate a
series of chemical reactions that con-verts the dry sludge into hydrocarbon
gases and charcoal-like carbon materials |
| |
|
| |
Before Drying |
 |
 |
|
After Drying |
| |
|
| |
Technical Specifications |
| |
|
Model |
Capacity (kg/d) |
Power Rating (kW) |
Dimensions (m) |
|
HD - 100 |
100 |
8 |
1.0 (L), 1.0 (W), 1.6 |
|
HD - 200 |
200 |
12 |
1.2 (L), 1.2 (W), 1.7 |
|
HD - 300 |
300 |
16 |
1.5 (L), 2.0 (W), 1.7 |
|
HD - 500 |
500 |
24 |
1.8 (L), 2.2 (W), 1.9 |
|
| |
|
| |
HiWave TM Dryer Come with:
- Magnetron Generators
- Stainless Steel Stirrer
- S. Steel Blower Scrubber
- Scrubber Pump
- Stainless Steel Casing
- Control Panel |
| |
|
| |
Save > 60% Disposal Cost |
| |
Example: Cost Comparison for 10 tons sludge per month |
| |
 |
| |
 |
